2/3 Piece Trunnion Mounted Ball Valve Devlon Seat , 600lb 900lb Pressure

API 6D ISO 17292 2 OR 3PCS BODY TRUNNION MOUNTED BALL VALVE DEVLON SEAT FOR 600LB 900LB

• Ball valves, trunnion mounted, split body, type HPA (pin trunnion), HRA (plate trunnion) and DB (pin trunnion).
• Design, manufacturing and materials comply with the Essential Safety Requirements of the 97/23/EC Directive (PED).
• All valves designed to API 6D and ASME VIII.
• Body wall thickness complies with ASME B16.34 (forged and/or cast).
• Full and reduced bore valves available.
• Bi-directional valves, double block and bleed, allowing the venting and the draining of the body cavity, in both open and closed position.
• Two seat designs available:
  • single piston effect (standard) providing self relieving of the body cavity overpressure
  • double piston effect providing double barrier (safety valve requested for cavity pressure relieving on liquid applications)
• Soft seat (PFA, PCTFE, PEEK, Polyamide) and metal seat (TCC) available.
• Blow out proof shouldered stem (retained by the valve body)
• Antistatic device to BS 5351 (10 Ω under 12 Volt) between body and seats and ball and stem.
• Guided stem (bearings) to minimize the operating torques.
• Fire tested to API 6FA and BS 6755 part II.
• Emergency sealant injection provision (all seats and stem) - standard for size 14” and above, lower sizes on request.
• Testing to API 6D: hydrostatic body shell test, hydrostatic seats test, DBB test, pneumatic seat test and torque measurement.
• Marking to API 6D and PED.
• Available with electric, pneumatic and hydraulic actuators.

BTN & BTP Series

• Sizes: 2” – 48”
  • Larger sizes are made to order
• Class: ANSI 150 – 2500
• Port: Full and Reduced Bore Available
• Body: Carbon and Stainless Steel
• Ball: A216 WCB with ENP Coating
• Features: 2-piece and 3-piece Body Designs, NACE MR-0175 (2009), API 6D, API 6FA, Fire Safe Design, Double Block and Bleed, Flanged Ends, Lever and Gear Operated, Lockable, Trunnion Mounted Ball
• Options: Valves can be made to order – Metal Seated Designs, Cryogenic Valves, 3-Way Valves, Exotic Alloys and more are available upon request

• SIDE ENTRY

  2/3 PIECE FORGED
  2 PIECES CASTED

  ALL SERVICES / FUNCTIONS / INSTALLATIONS
  THE MOST FLEXIBLE & RELIABLE DESIGN EASY MAINTENEABLE AT SITE

  NPS: 1⁄2”÷ 60”
  CLASS: 150# ÷ 2500#
  API‐6A: 2000 ÷ 15000 psi
  Flanged, BW, CF, HUB ends
  LT, CRYO, HT, SOUR, LETHAL, DIRTY, HP

  DB&B, DIB‐1, DIB‐2
  SOFT or METAL SEATED ALL BODY & TRIM METERIALS
  ELASTOMERIC, THERMOPLASTIC SEALS

  • 
  • 
  • 
  • 
  • 
  • 

  1. 1
  2. 2
  3. 3
  4. 4

  • Previous
  • Next
   

  WELDED BODY

  (FROM 2/3 FORGED)

  PIPELINES, UNDERGROUND, OFFSHORE, (SUBSEA) REDUCED WEIGHT, MINIMIZED LEAK PATH ENHANCHED STRUCTURAL INTEGRITY NO MAINTENANCE FORESEEN

  NPS: 12”÷ 60” TYPICAL
  CLASS: 150# ÷ 900# (API‐6A: 2000 ÷ 5000 psi) BW, (FLANGED)
  LT, SOUR, DIRTY, (HT)

  DB&B, DIB‐1, DIB‐2 SOFT & PMSS, (METAL) SEATED CARBON STEEL, LTCS, (DUPLEX‐SS) ELASTOMERIC SEALS, (THERMOPLASTIC) EASY CLADDING OF FUNCTIONAL / WETTED SURF.

  • 
  • 
  • 
  • 
  • 
  • 

  1. 1
  2. 2
  3. 3
  4. 4

  • Previous
  • Next
   

  TOP ENTRY

  CAST BODY
  (HP & S‐SIZES) FORGED

  MAINTENEABLE IN‐LINE / RISERS INCLUDED ALL FUNCTIONS & INSTALLATION MINIMIZED LEAK PATH

  NPS: 2”÷ 60”
  CLASS: 150# ÷ 2500# API‐6A: 2000 ÷ 15000 psi BW, FLANGED, HUB, C.F. SOUR, LETHAL, HP, LT, CRYO

  DB&B, DIB‐1, DIB‐2 SOFT & METAL SEATED ALL BODY & TRIM MATERIALS ELASTOMERIC & THERMOPLASTIC SEALS.