Gold top valve located in Oubei Town, Wenzhou, China,where can make all kinds of precision balls,including top entry,metal seat and V type balls.On this base,our products range of floating,trunnion,Gate globe check valve ,butterfly valve ,etc.Surely we can design them by customer's special requirements.
Place of Origin: | 中国 |
Brand Name: | GOLD TOP |
Certification: | API6D |
Model Number: | Q41F |
Minimum Order Quantity: | 1pcs |
---|---|
Packaging Details: | wooden box |
Delivery Time: | 5~35days |
Supply Ability: | 100+pcs+25days |
MATERIAL: | LF2 | Connection: | BW |
---|---|---|---|
Pressure: | 600LB | Standard: | ASME B16.34 |
Product Description: | Side-mounted Ball Valve | TRIM: | SS316l |
Connecting End: | ASME B16.5、ASME B16.25 | ||
High Light: | fb ball valve,full flow ball valve |
API6D FULL BORE BALL VALVE TRUNNION MOUNTED PEEK SEAT LF2 BODY BALL F51 GEAR 12INCH BW
Technical parameters and characteristics:
Product type | Switch valve |
Product description | Side-mounted fixed ball valve |
Model | Q47F fixed ball valve |
Nominal diameter | NPS 2~NPS 56 |
Operating temperature | -46℃~121℃ |
Operating pressure | CLASS 150~CLASS 2500 |
Material | WCB,A105,LCB,LF2,CF8,F304,CF8M,F316, etc. |
Design standard | API 6D,ISO 17292 |
Structural length | ASME B16.10 |
Connecting end | ASME B16.5,ASME B16.25 |
Test standard | API 598,API 6D |
Operation method | Handle, worm, motor-drive unit, pneumatic drive unit |
Application fields | Water, petroleum and natural gas |
Other remarks 1 | A locking device is provided to prevent misoperation of valve. |
Other remarks 2 | Valve stem flyout prevention structure design, to prevent accident due to flyout of valve stem caused by abnormal pressurization in the chamber |
Other remarks 3 | Fireproof and antistatic design |
Other remarks 4 | The valve stem and the valve seat are equipped with an injection system. |
Other remarks 5 | DBB (double block and bleed) function |
Other remarks 6 | Full bore of valve convenient for pigging, of small flow resistance and high flow capacity |
The ball on a trunnion ball valve does not move with medium pressure. Trunnion ball valves have floating seats. This valve uses pressure actuated seats with locked-in non-metallic face seals. To assure tight sealing at low pressures, special springs force the seats against the ball. At higher pressures, the upstream seat is forced against the ball by the pressure working across the differential between the area of the seat insert and the seat O-Ring; the higher the pressure, the tighter the seal.
Sealant Injection Device
Trunnion mounted ball valves are provided with devices, which are on both the stem and the seat of the valves DN 150 (NPS6) and larger and in the body cavity for valves less than DN 125. When the stem o-ring or the body seating ring is damaged, the medium leakage between the body and stem can be prevented by injecting sealant through the device.
Double Block and Bleed
The pressure actuated seats and bleed fittings allow double block and bleed operation. When used for block and bleed, this feature permits the valve to take the place of two valves. It also allows the operator to check up and downstream sealing by bleeding off the body pressure.
Anti-static Design
The ball of the trunnion ball valve is in close contact with the trunnion, adjusting cushion, and trunnion end cap, thus providing a passage for static electricity to escape the confines of the valve.
Fire Safe Design
In case of fire, non-fireproof material for packing and seat will be burnt-out and considerable medium leakage may possibly cause the fire to spread. FBV uses metal to metal or graphite seals as an auxiliary safeguard to prevent medium leakage in cases of fire as shown in figures. The fire safe design confirms to the requirements of API607, API 6FA, BS 6755 and JB/T 6899.
Contact Person: sales
Tel: +8613758447235