Gold top valve located in Oubei Town, Wenzhou, China,where can make all kinds of precision balls,including top entry,metal seat and V type balls.On this base,our products range of floating,trunnion,Gate globe check valve ,butterfly valve ,etc.Surely we can design them by customer's special requirements.
 |
| Place of Origin: | 中国 |
| Brand Name: | GOLD TOP |
| Certification: | API600 |
| Model Number: | Z41H |
| Minimum Order Quantity: | 1 |
|---|---|
| Packaging Details: | WOODEN BOX |
| Supply Ability: | 100+PCS+15DAYS |
| SIZE: | 2”～60”(50mm～1500mm) | MATERIAL: | A216 WCB、WCC; A217 WC6、WC9、C5、C12、C12A、CA15; A351 CF8、CF8M、CF3、CF3M、CF8C、CN3MN、CK3MCUN、CN7M; A352 LCB、LCC; A494 CW-6MC、CU5MCuC、M35-1; A890 4A(CD3MN)、5A(CE3MN)、6A(CD3MWCuN); ASME B 148 C95800、C95500, Etc. |
|---|---|---|---|
| Design Standard: | API 600、ASME B16.34、GB 12234、GB 12224 | Structural Length: | ASME B16.10 |
| TEST: | API 598、ISO 5208、JB/T9092、GB/T13927 | Connecting End: | ASME B16.5、ASME B16.25、GB 9113、GB 12224 |
| CONNECT: | RF RTJ FLANGE | ||
| High Light: | flexible wedge gate valve,high pressure gate valve |
||
ASME B16.34 GATE VALVE CF3 CF8M STAINLESS STEEL 150LB 300LB 600LB
● Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced, and CoCr alloy seat API Trim 8 suitable for applications up to 850°F (454°C).
● Seat face CoCr alloy hardfaced, ground and lapped to a mirror finish.
● Flexible wedge with low center stem wedge contact, in solid CA15 (13Cr)or hardfaced with 13Cr, SS 316, Monel or CoCr alloy. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage. A CoCr alloy hardfaced CF8M wedge is also available.
● Non-rotating stem with precision Acme threads and burnished finish. Double Acme for faster operation.
● Body and bonnet joint accurately machined.
● Body and bonnet castings are precision machined. One-piece bonnet up to NPS 12 (DN 300) for better alignment and fewer parts.
● Flanges: ASME Classes 150–300: 1⁄16” raised face.
ASME Classes 600–1500: 1⁄4” raised face.
Finish 125–250 AARH for all valves.
● Rotating stem nut is Austenitic ductile iron Gr. D-2C renewable in line (as shown). Thrust bearings are supplied as follows: ASME Classes 150–300: NPS 10–12 (DN 250–300), 1 bearing (top),
NPS 16 (DN 400) and up, two bearings,
ASME Classes 600–1500: NPS 6 (DN 150) and up.
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
Contact Person: sales
Tel: +8613758447235
